| |
Odasorb 1003 Product Guide
|
|
|
ODASORB products are designed to remove contaminants from air and gas streams in both dynamic and static situations. The materials are available in a variety of different formats with basis weights from 200 to 1000 g/mē and with activated carbon contents of up to 60% by weight.
|
Physical Properties
| Grade : |
Odasorb 1003 |
| Total Basis Weight : |
260 g/m² |
| Thickness : |
2.55 mm / 0.1" |
| Air Permeability : |
950 cm³/cm²/s @ 980 Pa. |
| Carbon Type : |
Coal, 325 mesh |
| Carbon Surface Area : |
900 - 1100 m²/g |
| Carbon Content : |
41%, 107 g/m² |
| Standard Width : |
150cm, 59" effective |
|
|
Mechanical and Chemical Properties
|
| Parameter |
High %
Carbon |
High Flow |
Self
Supporting |
Static
Adsorption |
Dynamic
Adsorption |
Can be
Pleated |
Can be
Moulded |
Can be
Wound |
Cellulose
Free |
| Odasorb 154 |
|
|
 |
|
|
|
|
|
|
| Odasorb 288 |
|
|
|
|
|
|
|
|
|
| Odasorb 1000 |
|
|
|
|
|
|
|
|
|
| Odasorb 1003 |
 |
|
|
|
|
|
|
|
|
|
Typical Applications
- Filtration in air filter units.
- Also available with a sub micron particulate removal media.
Special Attributes
Also available in a heavier (350 g/mē) grade, G1003FHC, by special request.
Health and Safety
Odasorb 1003 is an air laid web material consisting of powdered activated carbon bound onto a
polyester base with a modified acrylonitrile copolymer latex. None of the materials are known to
present a hazard when in the form described. The material is best stored in its original
wrappings, avoiding extremes of temperature and strong odours / solvents.
If cut Odasorb 154 may produce dust. Under UK Regulations (EH40/99) the OES of the dust is
quoted as LTEL (8 hr. TWA) of 3.5mg/m³ and STEL (15 min. period) of 7 mg/m³. Used material
should be disposed of responsibly in accordance with Local, State or Federal regulations.
This data sheet is intended as a guide only.
Download a data sheet here.
|
|
For a cleaner future use Purification Products
|
Website by Ridgetop Webdesign